Contents
At a glanceSide-by-side comparisonInstallation and supplyOutput and recoveryRunning costsCleaning and oil lifeOur verdictFAQsChoosing between a gas and an electric fryer is one of the first decisions when you fit out a kitchen that fries. Both cook good chips. The differences show up in how quickly they recover in a rush, what they cost to install and run, and how easy they are to keep clean. Your existing supply often settles the question before taste does.
This comparison sets out the trade offs for UK cafes, pubs, takeaways and restaurants. It covers installation rules, output, oil life and day to day cleaning, so you can match the fryer to your site and your menu. It also covers the case for running one of each, which is more common than many people expect and can help with allergen separation on a mixed menu.
At a glance
Gas fryer



Popular choices include the GasOne Black Floor Standing Fryer (£130.31), HomeTronix 2000W Stainless Steel Floor Standing Fryer (£49.99) and Bridge 1800W Floor Standing Fryer (£119.99).
See the whole floor standing fryers range.
Electric fryer



Popular choices include the Commercial 5000W Stainless Steel Floor Standing Fryer (£159.99), Deep Fryer 10L Stainless Steel Countertop Fryer (£59.99) and Commercial 5000W Stainless Steel Floor Standing Fryer, 2x6L (£109.99).
See the whole countertop fryers range.
Side-by-side comparison
| Feature | Gas fryer | Electric fryer |
|---|---|---|
| Best for | High volume chip shops and busy pubs | Cafes, small kitchens and food trucks |
| Installation | Gas Safe engineer, gas supply and interlock | Plug in or hardwired by an electrician |
| Recovery time | Strong, especially on large tanks | Fast on models with immersed elements |
| Heat into the kitchen | More, as the flue releases hot air | Less, as elements sit in the oil |
| Cleaning | Tank and tubes need care | Elements often lift out |
| Portability | Usually fixed in place | Countertop units move easily |
| Typical format | Floor standing | Countertop or floor standing |
Installation and supply
A gas fryer needs a gas supply, an engineer registered with Gas Safe to fit it and a link to the kitchen's gas interlock and extraction. If your site already has gas run to the right spot, installation can be simple. If not, adding a supply can be costly. An electric fryer needs the right electrical supply. Small ones run from a 13A plug, while larger and twin tank models need hardwiring. Check your fuse board capacity before you buy.
Output and recovery
Recovery time is the gap between dropping in cold food and the oil getting back to frying temperature. Large gas fryers are known for strong output, which is why many chip shops use them. Electric fryers with elements sitting in the oil transfer heat efficiently and can recover quickly too. For a cafe frying a few portions at a time, either will do the job. For a takeaway with a constant queue, compare the stated output per hour.
Running costs
Running costs depend on your tariffs as much as the fryer. Gas has often been cheaper per unit than electricity in the UK, but electric fryers waste less heat into the room. That can help with kitchen temperature and extraction loads. Look at the power rating and your energy prices, and remember that good oil care reduces costs more than the fuel choice does.
Cleaning and oil life
Electric fryers often have elements that lift out, which gives easy access to the whole tank. Gas fryers have heat tubes or a heated base under the oil, which take more care to clean. In both cases, filtering oil daily and skimming crumbs during service makes it last longer. A drain tap and a good filter system make the biggest difference to oil life.
Our verdict
Pick a gas fryer if you already have a gas supply in the right place, cook large volumes and want a fixed, floor standing unit. Pick an electric fryer if you lack gas, need flexibility, have a smaller menu or want a countertop unit you can move.
Many kitchens mix the two: a gas floor standing fryer for main chip production and an electric countertop fryer for allergen free or specialist items. Whichever you choose, talk to an engineer about installation before you order.
Prefer to browse everything? Our full ranges of floor standing fryers and countertop fryers have more sizes, finishes and price points than we could fit here.
Frequently asked questions
Are gas fryers cheaper to run than electric?
It depends on your energy tariffs and how the fryer is used. Gas has often been cheaper per unit in the UK, but electric fryers lose less heat into the room. Compare the power ratings with your current prices.
Can I put a gas fryer in a food truck?
Some mobile caterers use LPG fryers designed for that use. They must be installed safely with suitable ventilation, a secure cylinder and checks by a qualified engineer. Many food trucks choose electric to keep things simpler. Check your insurance terms too.
Which fryer is easier to clean?
Electric fryers with lift out elements are usually easier to clean, since you can reach the whole tank. Gas fryers need more care around the heat tubes or base. Filtering oil daily makes cleaning easier on both types.
Do both types need extraction?
Yes. Frying produces grease laden vapour, so commercial kitchens normally need suitable extraction whichever fryer you use. Gas fryers also need to work with the kitchen's gas interlock. Speak to your engineer about what your kitchen layout requires.